1. REFERENCE	YEAR	TITLE
   PS142	1961	Wooden doors.
   		Specific material, construction, dimension, type of doors and tests
   PS173	1962	Wooden windows.
   		Specifics the quality, construction and sizes of wooden windows for exterior – interior use in buildings.
   PS2684	1989	Doors terminology
   PS2685	1989	Door leave – Test of behavior under humidity variations. (successive uniform climates).
   		Specifies a method of testing the behavior under humidity variations of door leaves placed in successive uniform climates. ISO:6444
   PS2686	1989	Windows and door height windows wind resistance tests.
   		Defines method of testing for assessing structural performance, under positive / negative static air-pressure of windows to be fitted in the form of completely assembled and finished units
   PS2687	1989	Windows and door height windows air permeability test.
   		Defines the method used for air permeability, testing of windows to be fitted in exterior walls and supplied in the form of completely assembled and finished units.
   PS2688	1989	Partitions made of components test for resistance to wind (static pressure and slamming doors).
   		This standard is one of the series of standards relating to performance of building elements and gives method of testing the resistance to positive and negative static air pressure of complete partitions made of components, i.e. of the assembly consisting of partition components over panels and doors, their connection and device fixing them to the structure. It also specifies the method for assessing the effect of slamming doors.
   PS 2689	1989	Facades made of components – Test for resistance to positive and negative static pressure generated by wind. ISO:7894.
   		This Standard is one of the series of standards relating to performance of building elements-specifies method for testing resistance to positive and negative static air pressure of complete facades made of components, i.e. glazed component, fixed or opening.
   PS 2690	1989	Window and door height windows mechanical test. ISO:8248.
   		This standards specifies the methods to be used for the mechanical testing of windows and door height windows, supplied in the form of finished products in their normal condition of use.
   PS 2691	1989	Door sets – Static loading tests. ISO:8269
   		Specifies a method of testing the behavior of doorsteps under static loading. It applies to doorsteps with one pivoting leaf, without fixed parts.
   PS 2692	1989	Doorsets – Soft heavy body impact test. ISO:8270
   		Specifies a soft heavy body impact test for doorsets-applies to doorsets with one or two leaves as supplied ready for installation and including the leaf, door frame, associated hardware (closing, pivoting mechanism)
   PS 2693	1989	Door leaves – Hard body impact test. ISO:8271.
   		Specifies a hard body (steel ball) impact test for door leaves applies to all flat and rigid doors
   P.S. 2931	1990	Doors leaves – Measurement of dimension and of effects of squaimess.
   		Specifies a method of measuring the dimensions and defects of squareness of door leaves.
   P.S. 2932	1990	Doors leaves – Measurement of defects of general flatness.
   		Specifies the method for measuring the defects of general flatness of door leaves.
   P.S. 2933	1990	Doors sets – Static torsion test.
   		Specifies the method to be used to determine the residual deformation of door set and its hardware.
   P.S. 3039	1991	Door sets – Test of behavior between two different climates.
   		Specifies the method for the behavior testing of doors and door sets placed between two different climates
   P.S. 3040	1991	Door sets – Repeated opening and closing test.
   		Specifies the method to be used when determining the effect on door set of repeated opening and closing the door under normal conditions.
   P.S. 3041	1991	Symbol designation of direction of closing and faces of doors windows and shutters.
   		This standard fixex. The convention.
   		a) To identity by symbol for direction operating.
   		b) To specify the arrangement of the frame of door, windows, shutters in relation to premises.
   P.S. 3203	1992	Match board wooden door leaves for external use.
   		This standard specifies size limitation, materials, workman shop and construction for ledged and braced doors, framed and ledged doors and framed, ledged and braced doors, all with tongued and grooved match boarded facings for external use.
   P.S. 3204	1992	Metal door frames (steel).
   		This standard specifies sizes and general requirements for door frames fabricated from mild steel sheet and protective coatings suitable for internal or external use.
   PS: 3443	1993	Modular coordination – coordinating sizes for doorsets external and internal.
   		This Standard specifies the coordinating sizes for doorsets of all materials to be used in buildings, and which will fill coordinating spaces in dimensionally coordinated buildings.
   P.S. 3444	1993	Door-sets-Repeated torsion test.
   		This standard specifies the method to be used to determine the effect or repeated torsion on door sets and their hardware. It applies to all door sets made of any materials with vertically hinged door leaves in their normal operating conditions.
   P.S. 3559	1994	Internal and external wood door sets, door leaves and frames.
   		This Pakistan standard specified the metric sizes for dimension coordinated internal and external wood door sets, door leaves frames
   P.S. 3858	1996	Door closers-specification for mechanical performance of crank and rack overhead door closers.
   		This standard covers requirements for the mechanical performance of single action over head door closers (with or without back check), including their arms and arm linkage, not forming the pivotal or hinged arrangement of the door.
   PS 4031	1997	Test methods of bending and impact for building boards. (JIS-A:1408)
   		This standard describes a test method for bending test for boards of building.
   P.S. 4032	1997	Wooden flush door shutters, cellular and hollow core type part-1: plywood face panels.
   		This standard lays down requirements regarding types, sizes, materials, construction, workmanship and finish, and tests of cellular and hollow core wooden flush door shutters with face panels of plywood or cross band and face veneers.
   PS 4032-1	1997	Wooden flush door shutters, cellular and hollow core type. Part 1: Plywood face panels.
   		This standard lays down requirements regarding types, sizes, materials, construction, workmanship and finish, and tests of cellular and hollow core wooden flush door shutters with face panels of plywood or cross band and face veneers.
   PS 4347	1998	Test methods for wet tensile breaking strength of paper and paper products
   P.S. 4276	1999	Wooden flushed doors shutter, (cellular and hollow type) particle board and hard face panels.
   		This standard lays down the requirements regarding aterial grade, types, size, construction, finishes and tests for wooden flush door shutters of cellular and hollow core type with particle board face panels(both veneered and unmannered and hard board face panels.
   P.S. 4519	1999	Polyvinyl chloride (PVC) prime windows-sliding glass doors.
   		This standard specifies the polyvinyl chloride (PVC) prime windows – sliding glass doors.
   P.S. 4776	2001	Wood windows specification for factory assembled windows of various types.
   		This part of PS specifies requirements for materials (including preservation), profile design, workmanship, glazing, construction, security and safety, weather tightness performance and operation and strength performance of factory assembled wood framed windows of various types. The windows are designed to be finished with either opaque of non-opaque finish.
   P.S. 4756	2000	Locks and latches for doors in buildings.
   		This standard specifies tests and levels of performance for logs and latches for doors used in buildings. For logs and latches for doors used in housing it also specifies dimensions. Locks and latches for fire doors are not included.
   P.S. 230	1962	Glossary of terms applicable to timber plywood and joinery.
   		Define characteristics and explanatory terms, seasoning, defects, plywood air board terms and joinery terms.
   P.S. 287	1985	Timber, method of compression test for. (Withdrawn & superseded by PS:1730-1985 and PS:1734-1985).
   PS 461	1985	Timber, tension test for. (Withdrawn & superseded by PS:1731-2:1985)
   P.S. 551	1985	Shear test for timber, (Revised).
   		Specifies a method for determining the ultimate shearing stress of wood by compressive loading parallel to grain either along the radial or along the tangential surface.
   PS 552	1982	Determination of moisture content of wood. (1st Revision)
   P.S. 553	1965	Cleavage test for wood.
   		Specifies test materials, preparation of specimens, size of specimens, rate of loading and moisture content.
   P.S. 554	1965	Determination of specification gravity & weight per cubic centimeter for
   		timber.
   		Specifies test materials, preparation of specimens, procedure, calculation and moisture contents.
   P.S. 555	1985 (R)	Wood – Determination of ultimate strength in static bending. (1st Revision).
   		Specifies a method for determining the ultimate strength of wood in static bending.
   P.S. 556	1985	Impact bending test for timber
   		Specifies test materials, preparation of specimen, size of specimen and procedure of testing, calculation and procedure of testing, calculations and moisture contents.
   P.S. 844	1991 (R)	Plywood – classification (Revised)
   		Specifies classifications.
   P.S. 845	1990 (R)	Plywood – Measurement of dimension of panels, (1st Revised)
   		Specifies sampling moisture content, apparatus, procedure, expression of results and test report.
   P.S. 846	1990 (R)	Plywood – Veneer plywood for general use – General requirements. (1st Revised).
   		Specifies construction of panels, moisture content, workmanship, characteristics of outer and inner plies and gluing.
   P.S. 965	1990 (R)	Fiber building boards – Definition classification (1st Revised)
   		Gives a definition and established a classification of fibers building boards.
   P.S. 966	1990 (R)	Particle boards – Definition classification (1st Revised)
   		Covers definitions and classification.
   P.S. 984	1974	Plywood vocabulary
   		Specifies composition and preparation of elements, grain, plywood panels defects, repair, state of surface (non-finished) and transformation).
   P.S. 1545	1982	Wood – sampling methods and general requirements for physical and mechanical tests.
   		It specifies methods for the selective and mechanical sampling of wooed for the conditioning of selected material and for the preparation of test pieces. In addition, it specifies general requirements for physical and mechanical tests on small, clear test pieces free from visible effects.
   P.S. 1673	1985	Fiber building boards – Hard and medium boards for general purposes quality specification – water absorption and swelling in thickness.
   		Specifies the maximum values of water absorption and of swelling in thickness after immersion in water of hard and medium fibre building board.
   P.S. 1674	1985	Fiber building-Boards-Determination of moisture content. (Withdrawn & superseded by PS 2935:1990).
   P.S. 1728	1985	Fiber building boards, determination of dimensions of test pieces. (Withdrawn & superseded by PS 2934:1990).

   P.S. 1729	1985	Fiber building boards – Hard medium boards, determination of water absorption, swelling in thickness after immersion.
   P.S. 1730	1985	Wood test method, determination of ultimate stress in compression parallel to grain.
   		Specifies a method for determination the ultimate stress wood in compression parallel to grain.
   P.S. 1731	1985	Wood – Determination of ultimate tensile stress, parallel to grain.
   		Specifies a method for determining the ultimate tensile stress of wood parallel to grain.
   P.S. 1732	1985	Wood – Determination of ultimate tensile stress, perpendicular to grain
   		Specifies a method for determining the ultimate tensile stress if wood perpendicular to grain radical and tangential directions.
   P.S. 1733	1985	Wood – Determination of modular of Elasticity in static bending.
   		Specifies a method of determining the modules of elasticity of wood in static bending by measuring the deflections in the net bending area.
   P.S. 1734	1985	Wood – Testing in compression perpendicular to grain.
   		Specifies a method of testing wood in compression perpendicular to the grain to determine proportional limit (conventional ultimate strength) the load being applied to the whole surface (radial or tangential) of the test piece.
   P.S. 1906	1987	Wood preservation by means of water – borne copper – chrome – arsenic comparison.
   		Specifies requirements for the treatment of timber with water borne wood preservative consisting essentially of copper sulphate, sodium dichromate and hydrated assenic pent oxide etc. requirement for the composition of preservative and method of application are specified.
   P.S. 2668	1989	Fiber building boards hard and medium boards for general purposes quality specification appearance shape and dimension tolerance.
   		This standard establishes quality specifications for appearance, shape and dimensional tolerances of fibre building boards for general purpose.
   P.S. 2669	1989	Coniferous sawn timber size permissible deviation and shrinkage.
   		Specifies permissible deviations due to in accuracies in sawing, form nominal thicknesses, widths and lengths, for coniferous swan timber.
   P.S. 2670	1989	Coniferous, sawn timber sizes method of measurement.
   		Defines method of measurements of thickness, width, length and volume of coniferous sawn timber. Covers unplanned, square edge and un-edge coniferous sawn timber.
   P.S. 2671	1989	Wood – Determination of static hardness.
   		Specifies a method for the determination of the static hardness of wood.
   P.S. 2672	1989	Wood – Determination of resistance to impact indentation.
   		Specifies a method of the determination of resistance of wood to impact indentation.
   P.S. 2673	1989	Copper – Chrome water-born wood preservation and their application.
   		Specifies requirements for wood preservation consisting essentially of mixtures of copper sulphates and sodium dichromate of potassium dichromate and for the method of application of such preservative.
   P.S. 2934	1990	Wood based panels – Determination of dimension of test pieces.
   		Specifies a method for measuring the thickness length and width of test pieces of wood based panels such as fibre building boards defined in PS: 965 – 1990, particle boards, plywood etc.
   P.S. 2935	1990	Wood based panels – Determination of moisture content.
   		Specifies a method for determining the moisture content of wood based panels such as fibre building boards, particle boards, plywood etc.
   P.S. 3042	1991	Coniferous swan timber – Sizes terms and definition
   		This standard establishes a first series of terms and definitions for correct and adequate under standing of terms relating to square edged and edged sawn Timber it geometrical elements and sizes
   P.S. 3043	1991	Coniferous swan timber – Defects classification.
   		Specifies the national and international classification of defects of coniferous sawn timber for which the terms and definitions are specified in PS: 3042.
   P.S. 3044	1991	Medium density fiber board for interior use.
   		This standards covers definitions, dimensional tolerances, property requirements, test methods and methods of identification.
   P.S. 3205	1992	Plywood-veneer plywood with rotary cut veneer for general use rules for classification by appearance.
   		This standard established general rules for the classification by appearance of veneer plywood defined in PS: 984, plywood vocabulary.
   P.S. 3206	1992	Wood based panels – Determination of dimensions.
   		This standard specifies methods for measuring the thickness, width and length
   P.S. 3207	1992	Wood based panels – determination of density.
   		This  standard specifies a method of determining the censity of wood based panels such as fibre building boards, defined in PS: 965, particle, boards, defined in PS: 966, as well as plywood, defined in PS : 984.
   P.S. 3208	1992	Coniferous sawn timber-defect measurement.
   		This standard specified international methods of measurement of defects of coniferous sawn timber, classified in PS: 3043, coniferous sawn timber-defects-classification.
   P.S. 3560	1999	Grading rules for sawn timber.
   		The rules are intended for use in grading of sawn and hewn timbers produced in Pakistan and will be terms as “The grading rules” for sawn timbers.
   P.S. 3561	1994	Wood for manufacture of wood flooring-symbols for marking according to species.
   		This standard specified a masking system for wood, according to the species, utilized in the manufacturer of wood flooring.
   P.S. 3562	1994	Sound absorbing expanded pure agglomerated cork in tiles.
   		This standard specifies certain characteristics of sound absorbing expended pure agglomerated cork in tiles.
   P.S. 3563	1994	Sound reducing composition cork in tiles.
   		This standard specifies certain characteristics of sound-reducing composition cork in tiles.
   PS: 3581	1994	Sawn timber of broad leaved species-defects, classification
   PS: 3582	1994	Sawn timber of broad leaves species – Defects, terms and definition
   PS: 3583	1994	Sawn timber of broad  leaved species defects easurement
   PS: 3584	1994	Coniferous sawn timber – nominal dimension
   PS: 3585	1994	Coniferous and broad leaved tree sawlogs, visible defects-terms and definitions
   PS: 3586	1994	Coniferous and broad leaved tree sawlogs visible effects measurement
   PS: 3587	1994	Broad leaved sawn timber – Sizes method of measurements
   PS: 3588	1994	Sawn timber test methods determination of ultimate strength in shearing parallel to grain
   PS: 3589	1994	Sawn timber test methods determination of resistance to local transverse compression
   PS: 3590	1994	Timber structures-testing of unilateral punched metal plate fasteners and joints
   PS: 3591	1994	Timber structures-testing of joints made with mechanical fasteners – requirements for wood  density
   PS: 3592	1994	Fibre building  boards – Determination of bending strength
   PS: 3593	1994	Floor tiles of agglomerated cork method of test
   PS: 3594	1994	Agglomerated cork material of expansions joint for construction and building-test methods
   P.S. 3706	1995	Coniferous and broad leaved sawn timber frames transportation packages.
   		This standard specifies requirement for packages and multi packages of square-edged and nudged, planed and unplanned coniferous and broadleaved sawn timber.
   P.S. 3707	1995	Plywood-veneer plywood with rotary out veneer for general use classification by appearances of panels with outer veneers of poplar.
   		This standard establishes the permissible defects for the classification by appearance of surfaces of general purpose, veneer plywood with rotary cut outer veneers of poplar.
   P.S. 3859	1996	Expended pure agglomerated cork for thermal insulation characteristics, sampling and package.
   		Expanded pure agglomerated cork for thermal insulation – characteristics, sampling and packaging.
   P.S. 3860	1996	Mosaic parquet panels-general characteristics.
   		This standard covers the general manufacturing characteristics (dimension, permissible deviations, etc), the inspection and delivery conditions and the marking of mosaic  parquet panel for any species of wood.
   3880	1996	Cork and cork products-determination of thermal conductivity-hot plate method ()
   PS 4356	1998	Test methods for rubber property effect of liquids ()
   PS 4365	1998	Rubber vulcanized or thermoplastic determination of tension set at normal and high temperature ()
   P.S. 4520	1999	Timber in joinery general classification of timber quality.
   		This standard specifies the method to be used to determine the characteristics and classify the appearance quality of timber to joinery.
   P.S. 4755	2000	Standard grading rules for logs.
   		This standard specify grading rules for all timber species produced in Pakistan.
   5213	2012	Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
   		This specification covers procedures for computing the
   		reference resistance of wood-based materials and structural connections for use in load and resistance factor design
   5214	2012	25⁄8-In.  and 4-In. Diameter Metal Shear Plates for Use in Wood Constructions
   		This specification covers standardizing the dimensions
   		and materials for the manufacture of 25⁄8 and 4-in. diameter metal or cast iron shear plates used in the fabrication of connections in wood constructions.
   P.S. 231	1962	Mild steel bars for structural uses.
   		Specifies steel making process, quality of finished steel margin over and under dimension and weights, Pieces, tensile properties and tests.
   P.S. 240	1963	Plain cold drawn steel wire for pre-stressed concrete.
   		Specifies process of manufacture, quality of finished wire, chemical composition, tolerances, tensile strength, selection of test pieces, tests and size of coil
   P.S. 242	1963	Tensile testing of steel wire
   		Specifies symbols and designation, test pieces, determination of cross-sectional area of test piece determination of elongation, rate of testing determination of proof limit and proving tests.
   P.S. 385	1988 (R)	Steel-chorpy impact test (V-notch). (Revised).
   		Specifies principle of test, symbol and designations, test pieces, testing machine and test requirements.
   P.S. 423	1964	Cold drawn steel wire for concrete reinforcement.
   		Specifies process of manufacture, quality of finished wire, tensile test pieces, cold bend test pieces, selection of test pieces, tests, margin over and under specified dimensions, identification of wire calculation of weight and test at work.
   P.S. 424	1964	Load calibration of testing machine for tensile testing of steel.
   		Specifies calibration by means of: i) weight (mass), it) elastic devices (dynamometers), iii) proving levers and assessment of calibration.
   P.S. 425	1964	Calibration of vickers hardness testing machines.
   		Covers calibration of testing machines for determining vicker hardness.
   P.S. 427	1988	Chorpy impact test (u-noch for steel. (Revised).
   		Covers principle of test, symbols and designations, test pieces, testing machines and test requirements.
   P.S. 580	1966	Rolled deformed steel bars (intermediate grade) for concrete reinforcement. (Withdrawn & superceded by PS:1879-1989 and 1612-1984).
   P.S. 605	1966	Rolled deformed steel bars (hard grade for concrete reinforcement. (Withdrawn & superceded by PS:1879:1989 and 1612:1984).
   PS 606	1966	Rolled deformed steel bars (structural grade) for concrete reinforcement. (Withdrawn & superceded by PS:1879-1989 and 1612:1984)
   P.S. 607	1991	Steel and steel products- general technical delivery requirements, (2nd Revision).
   		Covers ordering, manufacturing processes, documents, carrying out acceptance tests, mechanical test, chemical composition, defects and dimensional tolerances and authorization for dispatch.
   PS 608	1967	Steel tubes, bend test for. (Withdrawn & superseded  by PS:2869-1990)
   PS 609	1967	Steel tubes, ring expanding test on ( & superseded by PS:2870-1990)
   P.S. 610	1967	Tables of brinell hardness (HB) for use in test made on flat surfaces.
   		Specifies table of brinell hardness values for steel.
   P.S. 611	1991	Specifies table of brinell hardness values for steel.
   		Metallic materials: Hardness test-Tables of Vickers hardness values (HV) for use in test made on flat surface, Part 2: HV 0.2 to HV S (Revised)
   P.S. 636	1967	Galvanized Steel Wire
   		Specifies terminology, materials, manufacture, ductility weight, reeling and marking.
   P.S. 680	1968	Steel nails for building purposes.
   		Specifies materials, workmanship, finish, dimensions and tolerances, inspection, certificate of compliance, weighs and designation of ordering.
   P.S. 681	1968	Hot rolled, steel strips (baling).
   		Specifies materials, chemical composition, mechanical properties, tolerances, supplier’s guarantee, inspection & testing facilities and test.
   P.S. 720	1991	Metallic material – Hardness test – verification of brinesll hardness testing machine (Revised).
   		Verification of brinesll hardness testing machines.
   PS 743	1969	Dimension of hot rolled steel sections equal leg- angles metric series –dimension and  sectional properties. ()
   PS 744	1969	Dimensions of hot rolled steel sections un-equal leg-anglesmetric series-dimensions and sectional properties.Specifies dimensions and sectional properties (withdrawn)
   P.S. 745	1994(R)	Steel and cast iron – determination of sulpher content combution titrimetric. (1st Revision)
   		Specification principle of method, regents, apparatus procedure, expression of results and test repost.
   PS 780	1968	Galvanized steel binding and jointing wire. (Withdrawn & superseded by PS:1850-1987)
   P.S. 847	1971	Selections & preparation of samples and test pieces prim wrought steel.
   		Covers selection and preparation of samples and test pieces for mechanical tests and selection and preparation of samples for chemical analysis.
   P.S. 908	1994 (R)	Method for chemical analysis of steel determination of Manganese volumetric. (1st Revision)
   		Covers principal of method, apparatus reagents, sampling procedure standardization and circulation.
   PS 909	1972	Hot rolled round and square steel bar-metric series, dimensions of (Withdrawn & superseded by PS:1856 and PS:1857)
   P.S. 910	1987 (R)	Hot-Rolled steel bars- Tolerances (1st Revision).
   		Specifies dimensions
   P.S. 981	1994 (R)	Steel wire Ropes for general purposes- characteristics. (1st Revision).
   		Specifies types of construction and diameter ranges-round strand, material and rope characteristics.
   P.S. 982	1974	Drawn wire for general purposes non alloy steel wire ropes.
   		Specifies quality of coating, diameters, breaking strength, simple torsion test, reverse bend test temple test on knotted wire, galvanized wire inspection on zinc coating and accepted conditions.
   P.S. 1612	2007 (R)	Steel for the reinforcement of concrete-Weldable reinforcing
   	2014 (2nd R)	Steel-Bar, coil and decoiled product-Specification
   PS 1850	1987	Zinc coating testing zinc coating on steel wire and quality requirements.
   		It specifies the methods of testing zinc coated steel wires and products fabricated, determine the nominal mass of the zinc coatings. ()
   P.S. 1856	1987	Hot rolled steel bars dimensions of round bars.
   		This standard specifies dimensions of metric series hot tolled steel round bars.
   P.S. 1857	1987	Hot rolled steel bars dimensions of square bars.
   		Specifies dimensions of metric series hot rolled steel square bars.
   P.S. 1858	1987	Hot rolled steel bars tolerances.
   		This standard specifies metric dimensional tolerances applicable to hot rolled steel bars supplied in straight length in the following product forms i.e round, square hexagonal, octagona and flate bars
   P.S. 1879	1987	Deformed & plain Billets – Steel Bars for the Concrete re-enforcement (metric)
   	2009 (1st R)	Specification covers deformed and plain billet hot-rolled steel concrete reinforcement bars. Sizes and dimensions of deformed bars and their designated number are given in table. Bars of two minimum yield levels namely 300 Mpa and 400 Mpa, designated as grade-300 and Grade-400 are specified.
   	2014
   	(2nd R)
   P.S. 1918	1987	Steel and cast iron-determination of total silicon gravimetric method
   		Specifies a gravimetric method for the determination of total silicon in steel and case iron.
   P.S. 1919	1987	Metallic materials – Hardness test – Brinell test Specifies the method for the brinells hardness test for metallic materials.
   P.S. 1920	1987	Metallic Material Wrapping Test.
   		Specifies the method for determining the ability of metallic wire of diameter or thickness 0.1 to 10 mm inclusive, to undergo plastic deformation during single torsion in one direction.
   P.S. 1921	1987	Metallic Material Wire simple torsion test.
   		Specifies the method of determining the ability of metallic wire of dia or thickness 0.3 to 10 mm inclusive to undergo plastic deformation during single torsion in one direction.
   P.S. 1922	1987	Steel and cast iron- Determination of total carbon content combustion gravimetric method.
   		Specifies a gravimetric method for determining the total carbon content of steel and cast iron after combustion of the test portion in current of oxygen.
   P.S. 2031	1988	Metallic materials – Bend test.
   		Specifies the method for determination the ability of metallic wire of diameter or thickness of 0.3 to 10mm to undergo plastic deformation during reserve bending.
   P.S. 2032	1988	Metallic Material Reverse Bend Test
   		Specifies the method for determining the ability of metallic wire of diameter or thickness of 0.3 to 10 mm to undergo plastic deformation during reverse bending.
   P.S. 2674	1989	Metallic materials – Tensile Testing at ambient temperature
   		Describes the method of tensile testing of metals at room temperature to determine the following properties, yield strength, prrof strength, tensile strength elongation, reduction area etc.
   P.S. 2869	1990	Metallic materials – Tube (in full section) – Bend test.
   		It specifies a method for detrermining the ability of full-section metallic tube of circular cross-section with an outside diameter not greater than 65 mm to undergo plastic deformation in bending.
   P.S. 2870	1990	Metallic materials – Tube – Flattening test.
   		It specifies a method for determining the ability of metallic tubes of circular cross-section having an outside diameter not greater than 400.
   P.S. 3045	1991	Rail steel deformed & plain bars for concrete reinforcement.
   		This specification covers deformed and plain rail steel concrete reinforcement bars. Bars are of two minimum yield levels 50,000 PSI (350 Mpa) an 60,000 PSI (400 Mpa) designated as Grade-50 (350) and Grade-60 (400) respectively are specified.
   P.S. 3046	1991	Axle-steel deformed and plain bars for concrete reinforcement.
   		This specification covers deformed and plain axle steel concrete reinforcement bars are of two minimum yield levels, namely 40,000 PSI (300 Mpa) and 600 000 ($00 Mpa) designated as Grade-40 (300) and Grade-60 (400) respectively are defined.
   P.S. 3209	1992	Steel for the pres stressing and concrete-General requirements.
   		Specifies requirements for high tensile strength steel to be used in pre stressed concrete. It applies only to material in the requirements for materials and anchorage devices used in conjunction with the pre stressing steel in structural components.
   P.S. 3445	1993	Steel bars for reinforcement of concrete-bend re bend test.
   		This specification specifies procedures for bend and rebends testing of reinforcing steel bars. The purpose of the rebend test is to determine the ageing properties of bars exposed to plastic deformation
   P.S. 3446	1993	Steel for the pre stressing of concrete- cold drawn wire.
   		This standard specifies requirements for round, cold drawn, high tensile steel wire, either plain, intended, ribbed or crimped. The product is supplied mill coil wire or straight ended and stress relieved wire in coils or cut lengths.
   P.S. 3447	1993	Steel for the pre stressing – strand.
   		It specifies requirements for high tensile steel strand which has been given a stress relieving heat treatment according to the general requirements specified in PS: 3209-1992. The strand may contain either 2, 3, 7 or 19 individual wire.
   P.S. 3448	1993	Certification scheme for steel bars and wire for the reinforcement of concrete structures.
   		It specifies rules for a certification scheme for continuous production of steel bars and wires for ordinary reinforcement of concrete structures in order to verify the conformity with requirements specified in product standards such as PS: 1612 and PS: 1879.
   P.S. 3564	1994	Fabricated deformed steel bar mats for concrete reinforcement.
   		This standard covers materials in mat (or sheet) from fabricated from hot rolled deformed steel bars to be used for the reinforcement of concrete.
   P.S. 3565	1994	Zinc coated steel wire for fencing
   		This standard specifies requirements for drawn steel wire zinc coated by the hot dip process, and intended for use in general purpose wire fending, barbed wire fending field fencing and chain link fencing.
   P.S. 3566	1994	Carbon steel Girder Rails of plain grooved and guard types.
   		This standard covers carbon steel grider rails of three classes based on type or type and weight, and chemistry.
   P.S. 3567	1994	Zinc coatings fore steel wire.
   		This standard covers the requirements for the mass quality and testing of zinc coatings and steel wire of circular cross section.
   P.S. 3708	1995	Steel wire hard drawn for prestressing concrete redrawing
   		This specification covers uncoated, high-strength hard-drawn steel wire for use in the manufacture of Prestressed concrete tanks and similar structures. In application, the wire is continuously wrapped on the structure maintaining tension by a device employing a wire drawing dia for back tension.
   P.S. 3709	1995	Zinc coated (Galvanized) steel bars for concrete reinforcement.
   		This standard covers concrete reinforcing bars with protective zinc coating applied by dipping the properly prepared reinforcing bars into a molten bath of zinc.
   P.S. 3861	1996	Steel for the pre-stressing of concrete quenched and tempered wire.
   		This standard specifies requirements for round wire made of quenched and tempered high tensile steel, with a surface which is either plain, ribbed, grooved for indented..
   P.S. 4033	1997	Hot rolled steel with or without subsequent processing.
   		This standard specifies requirements for round high tensile steel bars. The bars may be supplied either hot rolled or in a hot rolled and processed condition.

   P.S. 4034	1997	Epoxy coated reinforcing steel bars.
   		This standard covers deformed and plain steel reinforcing bars with protective epoxy coating applied by the electrostatic spray method.
   P.S. 4277	1998	Cold reduced steel wire for the reinforcement of concrete and the manufacturing of welded fabric.
   		This standard specifies technical requirements for cold reduced steel wire designed for the reinforcement of concrete or for use in welded fabric.
   P.S. 4278	1998	Steel for the reinforcement of concrete welded fabric.
   		This standard covered technical requirements for factory made sheets or rolls of welded fabric, manufactured from steel wires or bars with diameters from 4 mm to 16 mm and designed for the reinforcement present
   PS 4357	1998	Test method for rubber deterioration in air oven ()
   PS 4798	2002	Carbon structural steel ()
   PS:4994	2009	Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
   	2014 (1st R)
   PS 5023	2009	low-alloy steel deformed and plain bars for concrete reinforcement
   		A 751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products ()
   PS 5024	2009	Practice for Using significant Digits in Test Data to Determine Conformance with Specifications ()
   PS 5135	2009	Deformed and plain carbon-steel bars for reinforcement ()
   		Test Methods and Definitions for Mechanical Testing of Steel Products
   PS 5136	2009	Practices for packaging, marking and loading methods for steel products for shipment ()
   P.S. 232	1983	Ordinary Portland cement (4th Revision)
   	2008 (R)	Specific composition and manufacture, fineness, chemical composition, strength, consistence of standard cement paste, setting, time, soundness, sampling and test method.
   	2015 (4th R)
   P.S. 612	1989	Sulphate resisting Portland Cement Type A (1st Revision)